Tube.JPG

GALVANISED SCAFFOLD TUBE

(48.3mm nominal bore)

We stock tube with a wall thickness of 3.2mm or 4mm thickness, in various sizes from 5ft-21ft, we also stock Aluminium.

 

Conforming to BS1139
 

P.O.A

board1.PNG
Double 1.PNG
Swivvel 1.PNG

SCAFFOLD BOARDS

Available in standard industry lengths of 2.4m,  3.0m and 3.9m

All our boards conform to industry regulations

P.O.A 

DOUBLE COUPLER -DROP FORGED

Double couplers are used to connect scaffold tube at 90°

P.O.A

 

SWIVEL COUPLER -DROP FORGED

Swivel couplers are used to connect scaffold tube at any angle.

P.O.A

 

Single.PNG

SINGLE COUPLER (WRAPOVER) -DROP FORGED

This fitting is designed for connecting transoms to ledgers at a 90° angle. This fitting is a non load bearing coupler. 


P.O.A

Sleve.PNG

SLEEVE COUPLER -DROP FORGED

Used as an external connector to join two tubes end to end.


P.O.A

Joint Pin.PNG

JOINTING PIN -DROP FORGED
 

Used as an internal connector to join two tubes end to end.


P.O.A

SK.jpg

GIRDER COUPLER (SK) -DROP FORGED
 

Used to secure scaffold to girders or RSJs – must be used in pairs. 


P.O.A

SWIVEL SK.JPG

SWIVEL GIRDER COUPLER (SWIVEL SK) -DROP FORGED
 

Drop forged swivel girder couplers are designed to connect 48.3mm outside diameter scaffold tube to a range of structural sections up to a maximum flange thickness of 45mm at any angle through 360°


P.O.A

Board coupler.PNG

BOARD RETAINING COUPLER -DROP FORGED
 

Used for securing boards to scaffold.


P.O.A

HALF.JPG

HALF SWIVEL-DROP FORGED
 

Half swivel couplers are used in fabrication work to create components for hoist applications .This fitting has a 17mm diameter hole in the back and the lip of the fitting that grips the tube allows 8mm for a bolt to go inside without obstructing the tube.


P.O.A

Untitled.png

Baseplate

 

Used to create a flat surface and spread the load evenly at the base of the scaffold. Used in conjunction with timber or plastic solepads.


P.O.A

Tube Ties.JPG

Tube Ties - Available in single and double variants. Tube ties are used to keep the standard in a vertical position whilst supporting the weight of the structure.

P.O.A

Jacks.JPG

4 Ton Screw Jack
Used where the floor or ground is uneven, available in 150mm or 450mm lengths.

P.O.A

Prop to tibe swivel.JPG

Prop to Tube Double coupler-
Used to connect Props to tube at 90°

P.O.A